Please consider supporting me on Patreon: https://www.patreon.com/DanielNoree
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer.
Now, i am not talking about a “print-several-pieces-and-then-assemble” version which there are already a ton of on the internet.
What i wanted to do was something i could print and that would actually be fully working straight out of the printer.
I like to think i came pretty close. All you need to do is to remove the internal support and your done!
Keep in mind this is a proof of concept, i just wanted to see if i could do it.
Updated 2013-10-16: Added “Printable Wrench W Longer Screw” which has a longer “screw” (3mm).
Updated 2013-08-30: I have added two new files. One with a slightly bigger gap between moving parts. This one has 0,55mm gap instead of 0,35mm. Let me know if it works out (in particular with PLA). I have also added a STEP file with no support for anyone who maight want it.
Here is a short video: https://youtu.be/Eq_JI3yctJ8
Experimantal “heavy duty” version: https://www.youmagine.com/designs/printable-wrench-reworked
Please consider supporting me on Patreon: https://www.patreon.com/DanielNoree
screenshot-www.thingiverse.com-2022.02.27-15_36_33-2742ec82
screenshot-www.thingiverse.com-2022.02.27-15_36_49-146f435b
screenshot-www.thingiverse.com-2022.02.27-15_37_08-f9de6890- https://www.thingiverse.com/thing:139268
- barspin
- Dual_Extrusion_Wrench__Supports-62f9eb8a
Dual_Extrusion_Wrench__Supports-62f9eb8a -
This content is licensed under a Creative Commons Attribution 4.0 International license.