3D printable kazoo instrument, just add wax paper!

Just print, assemble the parts, add wax paper, and you’re ready to hum.

Instructions

For full kazoo in 1 print use the Kazoo_All.STL file & make sure to use exterior support, for the valve to print properly.

Each part is also available in a separate file, only the valve needs support, the cap and body are fine to print without.

To play;
• Insert the valve into the main body
• Cut a small piece of wax paper (about 1″ square) & place it on top of the valve
• Gently push the cap over the wax paper and onto the valve
• For best sound, hum into the larger end
• Enjoy!

Object height: 119mm
STP and STL formats available.