Small stackable crate I’ve designed. Original size is 150×95 mm, this prints fine with a 0.4mm Nozzle. When scaling down, I would recommend using a smaller one.
Update: By request I’ve also uploaded the FCStd-file (FreeCAD) but be aware that this is a little bit messy.
mediaman designed some brackets to retain the crates position: https://www.thingiverse.com/thing:4758140
Printer:
HEVO
Rafts:
Supports:
Resolution:
Infill:
Filament brand:
Esun, BQ
Filament color:
orange, grass green
Filament material:
PLA
Notes:
Most normal filaments print fine without support.
If you want to use more challenging materials (like e.g. wood-PLA) I would recommend adding some custom support for the handles. Infill is pretty much irrelevant, it is basically only needed for printing the top-layers of the floor of the crate. Two perimeters give enough rigidity.
screenshot-www.thingiverse.com-2022.03.28-12_42_05-c2c10e46
screenshot-www.thingiverse.com-2022.03.28-12_43_21-466fd9eb- https://www.thingiverse.com/thing:4734271
- brainchecker
- crate_mesh_bottom_150x95-40f5d86c
crate_mesh_bottom_150x95-40f5d86c -
This content is licensed under a Creative Commons Attribution 4.0 International license.