screenshot-www.thingiverse.com-2022.04.12-15_26_59-1ad47d6c

Chameleon Pen Holder (High-Res)

The idea is not new and there is already one remix available but I wanted more smooth surface and bigger plus centered hole for the pen.
(hole diameter : 10mm)

for bigger pens simple scale it up (example:12mm Hole scale up 120%)

prints fine without support

Thanks goes to Ishibashi-san (bs3) for the design
ありがとうご ざ います

please check here as well:
https://www.youtube.com/channel/UCkWGgSjbHl0JN86glKJZuTA

Print Settings

Printer brand:

Printer:

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2mm

Infill:

20%

Notes:


screenshot-www.thingiverse.com-2022.04.05-22_34_18-5f6ad011

Low Poly Golden Retriever - Beto

Want to support my work and even sell 3D prints of some of my designs? Check the following links.

Patreon: http://www.patreon.com/flowalistik
Donations: http://www.paypal.me/flowalistik


Low-poly dog (Beto).

This model needs support material on some parts. I'm sorry.

In this video, I explain the design process and some post-processing tips: https://youtu.be/fMA0kCPqRtU

I printed the model using Proto Pasta Magnetic Iron PLA from Hawk3DProto. https://goo.gl/Neqsgc

I'd like to thank all my supporters and patrons, with your help I've been able to create this project. The Patreon MVPs for this project are 3D Maker Noob, 3D Printing Stuff, MatterHackers, Filaments.directory, Dattas Moonchaser, MidnightGiant, Andrew Howat, Didier Klein and David Kessler!


screenshot-www.thingiverse.com-2022.04.05-17_05_16-e0c5b457

Cute Octopus Says Hello

'Cute Octopus Says Hello' is MakerBot's inaugural #WeekendMake series. Click on the Instructions tab for print instructions and read MakerBot's blog post to be ready for the next challenge.
http://www.makerbot.com/blog/2014/07/03/makerbot-replicator-mini-introducing-weekendmake/
Enjoy!
Designed by Jason

Instructions

Printing Instructions For MakerBot Mini
=============================
If connected via WI-FI:


  • On the Thing page, click on Thing Files to see available files.
    Click on the part or version you want to print to download the thing to your computer. Click on the file once downloaded. MakerBot Desktop will open and the file you selected will appear on the build plate.
  • Click the Print button to slice your model. To send the file to your MakerBot Replicator Mini and exit the Print dialog, click Start Print.
  • When the print file is sent to the MakerBot Replicator Mini, the Action Button will blink blue. Press the Action Button to confirm the print. The Action Button will then glow red, indicating it is heating the MakerBot Replicator Smart Extruder. When the Smart Extruder is fully heated, the MakerBot Replicator Mini will start to print your model.
  • When your print finishes, wait for the Smart Extruder to cool, then remove the build plate from the MakerBot Replicator Mini. Remove the print from the build plate, and peel off the raft from the bottom of the print.
  • Every object printed on your MakerBot Replicator Mini will be built on a raft. The raft acts as a base for your object and any support structures, and ensures that everything adheres well to the build plate. The raft will be easily removable once you remove your finished object from the build plate.
  • You're almost done. Go enjoy your weekend and take your newly printed friend with you. Take a few creative photos and upload them to Thingiverse as a Make by clicking I Made One above.
    If connected via USB:

  • On the Thing page, click on Thing Files to see available files.
    Click on the part or version you want to print to download the thing to your computer. Click on the file once downloaded. MakerBot Desktop will open and the file you selected will appear on the build plate.
  • Click the Print button to slice your model. To send the file to your MakerBot Replicator Mini and exit the Print dialog, click Start Print.
  • If you decide not to send the file to the MakerBot Replicator Mini, click Cancel Print.
  • When the print file is sent to the MakerBot Replicator Mini, the Action Button will glow red, indicating it is heating the MakerBot Replicator Smart Extruder. When the Smart Extruder is fully heated, the MakerBotReplicator Mini will start to print your model.
  • When your print finishes, wait for the Smart Extruder to cool, then remove the build plate from the MakerBot Replicator Mini. Remove the print from the build plate, and peel off the raft from the bottom of the print.
  • Every object printed on your MakerBot Replicator Mini will be built on a raft. The raft acts as a base for your object and any support structures, and ensures that everything adheres well to the build plate. The raft will be easily removable once you remove your finished object from the build plate.
  • You're almost done. Go enjoy your weekend and take your newly printed friend with you. Take a few creative photos and upload them to Thingiverse as a Make by clicking I Made One above.

screenshot-www.thingiverse.com-2022.03.28-14_16_16-363a640e

Articulated Snake

This object can be printed at once, with no assembly needed after printed.

Nos supports needed.


Well, it is a little embarrassing for me, but... If you like my designs, please think about donate on my PayPal -> [email protected]
Thanks! It will help and motivate me to continue creating new and better models.


Print Settings

Printer:

Sunhokey Prusa I3

Rafts:

No

Supports:

No

Resolution:

0.25

Infill:

15

Filament brand:

Sakata

Filament color:

Gray

Filament material:

PLA


screenshot-www.thingiverse.com-2022.03.28-13_57_23-008e7206

Loggerhead Sea Turtle (poseable)

A model loggerhead turtle with moveable flippers. You could call it an "action figure", but there's a distinct absence of mutation and/or martial arts training for this little guy!

All four flippers are attached by ball joints that are captured during the printing process. The front and back halves of the model snap together with the included H-clip.

Some cool info about loggerheads: http://www.youtube.com/watch?v=isjxWHoMz1E

Just want to print it?
Then "Loggerhead_plated.STL" is the file for you!

Switch off automatic supports in your slicer software. There are only two supports needed and they're included in the STL. Don't forget to snap them off with pliers after printing.

Plate it yourself? Dual Extruder? Soluble supports?
Download "Loggerhead_unplated.zip" and may The Force be with you.

Instructions

The model is designed to print with only two supports (included in the STL) for the rear flipper ball joints in the back half of the model.

After printing the back half its supports should be removed with pointy-nosed pliers. You should see a kind of crown pattern where the support and and the ball meet. It doesn't really matter if you can't get the whole support out - the back flippers will still move, but not quite as much.

The joints have a 0.5mm clearance when printed at 100% scale, which should be fine for most printers. If they feel too loose after printing then try heating the model and pressing the surrounding plastic to tighten the socket.

Depending on your printer and slicer calibration the very first layer may fuse the ball and socket together in the front half of the model. If this happens then carefully cut through to the gap with a hobby knife after printing. Update: I have uploaded a version designed to minimise any first layer fusing (see Loggerhead_NoFuseJoints_plated.STL).

The two halves will join together best if the surface between them is perfectly flat. For this reason I would suggest printing without a raft if possible (or sanding off any marks it leaves).


screenshot-www.thingiverse.com-2022.03.25-23_24_48-40b2d16b

Floppy Dragonfly

I wanted to create a dragonfly model since my daughter and I found a dead dragonfly this summer.

The overall proportions are based on the one we found. I tried to create a pattern for the wings which is similar to the real thing but with less detail to make it printable.

Quite happy how it turned out :)


Update Oct. 16th 2018
The front wings of the patterned model were partially lifted (about 0.13 mm) above the the rest. Fixed and updated the stl. Thanks to jerzone for letting me know in the comments!

Update Oct. 18th 2018
Made some small clean-ups to the patterned wings again, hopefully all slicers will work now without issues! No need to update if the previous version sliced correctly for you.
Thanks to ericleejoe for reporting the problem with S3D slicer in the comments.

Update Oct. 19th 2018
Another small fix specific to Simplify 3D slicer. Welded the hanger hole piece to the tip of the tail instead of just having them overlap.


If you like this thing please give it a heart and check out my other designs here!

Print Settings

Resolution:

0.3 mm

Infill:

30 %

Filament brand:

-

Filament material:

PLA

Notes:

Printed with 3 shells for strength.


screenshot-www.thingiverse.com-2022.03.22-22_05_00-96a7f105

RATZ

'RATZ' are a fun print that can become quite addictive. it's all to easy to end up with a 'RATZ' infested house. There are two options provided. The 'Biting RATZ' file opens the mouth when you left the tail and, printed well (with 3 shells / 50% infill or more), has a good bite!

The 'RATZ' file is a static model with no moving parts. This file can be printed with 2 shells and 10 - 15% infill as it doesn't need the strength required for the 'Biting RATZ' file to make it springy and strong.

At standard size "RATZ' are approx. 85mm tall. They print great in PLA on Makerbot's (as the images show). They should print well in PLA on most well set up accurate machines. However, the design use extreme angles that will be a challenge for ABS. Please also note that some slicing apps and machines may find the fine tolerances / angles / detail challenging. No support required.

'RATZ' are fun... if you print one you'll end up printing lots. The designs have been test printed lots of times to refine them (as the images show)... so get started and infest your house / office / car with some 'RATZ'.

Please refer to the instructions and images for additional information... and if you print some 'RATZ' please post images showing what your 'RATZ' are getting up to or into!

Other similar designs are as follows:

'Z-REX' http://www.thingiverse.com/thing:1594269

'Sharkz' http://www.thingiverse.com/thing:910216

'Crocz' http://www.thingiverse.com/thing:941177

'Eaglez' http://www.thingiverse.com/thing:963892

'Catz' http://www.thingiverse.com/thing:988088

Note: If you like this check out the rest of my fun and practical designs.

Print Settings

Printer brand:

MakerBot

Printer:

Rafts:

Doesn't Matter

Supports:

No

Resolution:

Standard / 0.20mm

Infill:

Biting type requires 3 shells / 50% infill to make it strong and springy

Notes:

Easy print in PLA on a machine will a filament fan... but there are extreme angles and fine tolerances that may be a challenge for some machines and slicing apps as well as ABS. They print really well on MakerBot's as shown in the images provided.

No support is required... leave it turned "OFF" to make sure support doesn't the biting up inside the biting type as there would be no way to clear it out and it would not move as expected..

Post-Printing
Biting RATZ

If you lift the tail and the mouth doesn't open immediately wriggle the tail and mouth gently to free them. Adequate clearance has been allowed for most machines / slicing apps but others may need a little movement to free these parts up.


screenshot-www.thingiverse.com-2022.03.22-18_27_43-fe951554

Flexi Articulated Hummingbird

Hello guys, please show me your 3d prints. Print the model and than please make a photo and post it under "Post a Make".

This is a articulated, flexi Hummingbird!
The model is about 80mm.
Do not use support as that could stop the joints printing separately / free.
post images of your flexi's

I used the following materials

watch how it is make

Updates:

  • v2: The holes of the bird are 0.2mm smaller, so the wings sit better.

discover my other designs


Website: http://www.jtronics.de/
Instagram: https://www.instagram.com/jtronics.de/
Youtube: https://www.youtube.com/jtronicsTV
Twitter: https://twitter.com/jtronics2
Facebook: https://www.facebook.com/jtronics.de/
Thingiverse: https://www.thingiverse.com/jtronics/designs


screenshot-www.thingiverse.com-2022.03.22-18_15_09-69d849c4

A-FRAME Bird feeder

A-FRAME bird house/feeder, with drainage holes.

Follow @perroncorriveau


screenshot-www.thingiverse.com-2022.03.14-18_05_54-bafd4519

Gecko

I originally made a gecko because it was the logo of a local festival that my maker space (MESH Melbourne Eastern Suburbs Hackers) was presenting at.

I decide make it better. I'm pretty happy with the result so I put it on Thingiverse.