screenshot-www.thingiverse.com-2022.03.28-13_28_55-f0a7adf3

Winnie the Pooh

Winnie-the-Pooh, also called Pooh Bear, is a fictional anthropomorphic teddy bear created by English author A. A. Milne.

A. A. Milne named the character Winnie-the-Pooh after a teddy bear owned by his son, Christopher Robin Milne, who was the basis for the character Christopher Robin. The rest of Christopher Robin Milne's toys – Piglet, Eeyore, Kanga, Roo, and Tigger – were incorporated into Milne's stories. Two more characters, Owl and Rabbit, were created by Milne's imagination, while Gopher was added to the Disney version.

No supports are required. If you have the proper filament colors, no painting is needed.

The assembled model is 140mm tall

**Note: Even though my slicer had no issues with this model, I found that other slicers did not handle some parts well. I updated three parts and added "_new" to them. If you have any slicing issues, please download these parts. I've removed the original ones.

Enjoy!

Print Settings

Printer:

FlashForge Creator X

Rafts:

No

Supports:

No

Resolution:

.2mm

Infill:

10%

Notes:

Refer to the notes below for helpful printing and assembly instructions.

Building the Model
Colors (there are no multiple printed pieces)

Black:
nose
eyebrow_right
eyebrow_left
eye_right
eye_left
hunny_text
..
Red:
shirt_new
tongue
sleeve_right
sleeve_left
..
Gold:
head
body_new
arm_right_new
arm_left
leg_right
leg_left
..
Dark Brown:
jar_top
..
Light Brown:
jar_bottom
..
Woodchip (color worked out for me):
honey

Printing and assembly tips

Printing tips
1-As with most of my models, I strive to make all the pieces support free. The interesting thing about this model is that I initially could not design the head piece completely support free around the mouth area. When it came time to print the head, I'm so used to not using supports that I forgot to add the supports to the mouth area. The head printed fine anyway, with a few loose strands in the mouth section that get covered by the tongue.stl part anyway.

2-The parts should fit nicely when printed cleanly or with a slight first layer squish.

3-Please not that due to the texture on all the body parts, print time is increased. Be patient printing those parts.

4-Due to the texture complexity of the body parts, slicing may take longer than expected. Again, be patient and you should have no issue with your slicer.

..
Assembly tips:
1-The left/right eye pieces are slightly different, but are small enough to be interchangeable. I post all my parts exactly as modeled.

2-The hunny_text letters are intentionally printed reversed. I find that they fit better with the flat side facing out. Since the letters are being attached to a slightly curved surface it is a good idea to bend the individual letters slightly before gluing them on to the jar.

3-Refer to the assembly diagram for putting the model together. The model is meant to be glued.


screenshot-www.thingiverse.com-2022.03.06-21_49_30-9344f393

Kermit the Frog

Kermit the Frog, a Muppet character by Jim Henson.

Kermit serves as the straight man protagonist of numerous Muppet productions, most notably Sesame Street and The Muppet Show, as well as in other television series, films, specials, and public service announcements through the years.

No supports are required. If you have the proper filament colors, no painting is needed.

The assembled model is 140mm tall.

Enjoy!

Print Settings

Printer:

FlashForge Creator X

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.2mm

Infill:

10%

Notes:

Refer to the notes below for helpful printing and assembly instructions.

Building the Model
Colors (there are no multiple printed pieces)

Black:
eye_black_right
eye_black_left
mouth_black
..
Red:
mouth_top
mouth_bottom
..
Green:
head
body
..
White:
eye_white_right
eye_white_left
..
Yellow:
ruff
..
Pink:
tongue

Printing and assembly tips

Printing tips
1-No supports are required. and I printed all the pieces without a brim or raft.

2-The parts should fit nicely when printed cleanly or with a slight first layer squish.

..
Assembly tips:
1-The left/right black eye pieces are interchangeable. I post all my parts exactly as modeled, even if they are duplicated.

2-Position the ruff on the body, noting that the ruff should sit very comfortable over the shoulders.

3-**Important: the mouth_top part is printed flat but the roof of the mouth is curved. Glue the mouth_bottom to the head first, then try and bend/flex the mouth_top piece so it fits the roof of the mouth a bit. You may need to hold this piece up while the glue is setting.

4-The tongue fits into a slight groove in the mouth_bottom piece. The mouth_black piece should be simply centered left/right and placed as far back on the mouth_top piece. The points of the mouth_black piece should point forward. I wanted to keep the mouth_top piece as thin and flexible as possible, so no indent was added for the mouth_black piece

5-Refer to the assembly diagram for putting the model together. The model is meant to be glued.


screenshot-www.thingiverse.com-2022.03.03-16_29_03-405b1093

Pilot Snoopy - Red Baron Figure

Watch here for more information!
https://youtu.be/J6bj4AXDD9U

It's time for the classic Ace Pilot Snoopy! This is a 3D modeled and 3D printed version of Snoopy's Pilot form with his house. Hope you like it! Let me know what you think. :)

Modeling Software: ZBrush
Printer Snoopy: Peopoly Moai
Printer House: Prusa i3 MK3
Resin Snoopy: Peopoly Neon Green
Filament House: Polymaker Polysmooth


screenshot-www.thingiverse.com-2022.02.26-13_33_12-4f826392

Patrick star

Patrick star stl Free

there are 2 options to print

1.1part
2.2parts

there are many more models in my cult3d
https://cults3d.com/en/users/HaeSea/creations

instagram
https://www.instagram.com/haesea_3dprinter/