screenshot-www.thingiverse.com-2022.03.15-12_24_01-4ade826a

Bag Clip with Screw Cap - new version!

New improved version of my Bag Clip with Screw Cap!

I addressed some of the problems that have been mentioned in the comments.
The new clip has an improved shape so it doesn't bend anymore. The hinge and locking mechanism is easier to open and close!
The air seal has also been improved because of the better stiffness and two sealing grooves on the inside of the clip.

I also provided the f3d file and tried to make everything as parametric as possible.
You can change the parameters depending on your needs. The most important ones are hole_diameter, clip_length and tolerance.

Finally, thank you all for the great feedback on my previous version of the bag clip!
Since it was my first upload, I never thought it would end up being that popular!

Print Settings

Printer brand:

Printer:

CR-10 Mini

Rafts:

No

Supports:

No

Resolution:

0.2mm layer height, 0.4mm nozzle

Infill:

20%

Filament brand:

Enotepad

Filament color:

Grey

Filament material:

PLA, PETG

Notes:

Printed with 6 Perimeters.
Tested with PLA and PETG.
It might be a little harder to get the hinge loose with PETG, because of the better layer adhesion.