screenshot-www.thingiverse.com-2022.03.14-15_02_27-4232023a

Adjustable Watch Stand

Made an adjustable holder for my watches, so that I can compensate small differences in diameter of the strap.

It is designed with small teeth, so you can adjust it after you put your watch on it. That makes it easier to find the correct dimension. If it doesn't fit your watches, just scale the whole thing up or down ;-)

The design is a remix of thing:3053563.


Update 15.11.2018

I designed a small modular platform, so that you can arrange your watches on your cupboard evenly. It is shaped like a puzzle piece, so you can add more watches whenever you want.
The existing watch stand does not need to be glued into the platform, just put it in.

 

Print Settings

Printer brand:

Printer:

Rafts:

No

Supports:

No

Resolution:

0.15mm

Infill:

20%

Filament brand:

Filament color:

White

Filament material:

PETG (nGen)

Notes:

I used a small Brim to fight slight warping.

screenshot-www.thingiverse.com-2022.03.07-20_34_32-835b7ea4

SpecStand Vertical Desktop Eyeglass Holder

This is a handy desktop eyeglass or keyring stand with hook. the base has four internal cavities for pennies which can be added during the print for a weighted base if you add an M601 command to your gcode in order to pause the print before layer 2.6 starts.

The main stand body does not need supports, but the hook does require supports. I suggest printing 2 hooks at a time to allow cooling in between layers of this small part. Make sure you clean any support material from the hook's v-tabs and file down gently if necessary for easier assembly, if it's too tight of a fit it will crack the stand slot.

If you set the support spacing to 2mm it can eliminate filling the hook's v-tab with support material and promote a quick cleanup and easy assembly.

Just add a small drop of super glue to the mating surface of the hook, slide it down into the slot at the top of the stand and assembly is complete.
Try one in Glow in the dark for your nightstand!

Print Settings

Printer brand:

Printer:

Prusa Mk2

Resolution:

.2

Infill:

14%