screenshot-www.thingiverse.com-2022.04.12-16_05_04-2a2134c7

Paper Plate Storage Container

This paper plate holder will hold about 100 paper plates up to 8.5in wide. The slot inside of the container allows for easy grip of the top layer plate.

Print Settings

Printer brand:

Printer:

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%

Filament brand:

OVERTURE

Filament color:

Digital Blue

Filament material:

PLA+


screenshot-www.thingiverse.com-2022.04.06-18_38_04-76a9f002

Coffee Table Laptop Shelf

Keep your surfaces clear and your laptop safe from spills with this low profile shelf. Sized for the 2017 HP Spectre, but it'll fit most 15in laptops. Printed in PLA with no supports or raft, needs at least 20% infill to survive installation or accidental kicks.

Print Settings

Printer brand:

MakerBot

Printer:

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

30%

screenshot-www.thingiverse.com-2022.03.28-13_18_33-73786e95

Spray-can holder

This is a chain style can holder, you can connect them as much as you need.
Move one side slightly up to make inclain that prevent the can from falling down (it works fine even if its level).

Print Settings

Printer brand:

RepRap

Printer:

Prusa I3

Rafts:

No

Supports:

No

Infill:

100

screenshot-www.thingiverse.com-2022.03.28-12_55_26-3506e959

Round shelf

Decorate your favorite accessories on a wall-mountable round shelf.

What do you want to decorate?

The size of the round is about 196x50mm.
One design has a fixed direction,
The other designs can be used in 4 angles.

The size of the wood screw I used is M4x20mm.
We also have a stand, but you'll need glue as the shelves will spin around.

Print Settings

Printer brand:

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.1~0.2

Infill:

20%~

Filament brand:

PLIRINE

Filament color:

Black or White

Filament material:

PLA

Notes:

It is better to set a large infill density to increase the strength.


screenshot-www.thingiverse.com-2022.03.16-11_47_01-a4c3730e

Assortment system box 1x1

This Box is one of the sizes of the complete assortment box set from my assortment cabinet video.

Watch the video here to learn more: https://youtu.be/CHFK5sY8ToE

The drawers in the cabinet (all 19 of them!) are made in a 6 by 6 grid. So you can fit either 36 of the 1x1 boxes or 3 of the 2x6 boxes. Or any other random variation you may desire!

All the boxes have a place to stick a label, this not only allows you to see what's in the boxes from above but also doubles as a handle to pull them out!

If you want the complete drawings for the assortment cabinet with drawers that fit these boxes, you can download them from my Patreon page: https://www.patreon.com/chappel

Find all the other sized boxes here:

1 x 1 : https://www.thingiverse.com/thing:4160638/
1 x 2 : https://www.thingiverse.com/thing:4160745/
1 x 3 : https://www.thingiverse.com/thing:4160755/
1 x 4 : https://www.thingiverse.com/thing:4160763/
1 x 5 : https://www.thingiverse.com/thing:4160785/
2 x 2 : https://www.thingiverse.com/thing:4160774/
2 x 3 : https://www.thingiverse.com/thing:4160793/
2 x 6 : https://www.thingiverse.com/thing:4160787/

3d printed drawer handles router templates: https://www.thingiverse.com/thing:4160874

Corner alignment jig for the cabinet: https://www.thingiverse.com/thing:4160866